Measurements

LMA_MAIN

Current leakage clamp B102

– Phased out –

Leakage clamp for NanoVIP® power quality analyzers

The B102 clamp is designed for measuring leakage current diverted towards the earth.

Versatile, easy to use and powerful

  • Can be used on NanoVIP® family analyzers without the need for external power supply or amplification.
  • Designed for the measurement of leakeage currents
  • Robust and reliable
  • The grippers can grip conductors up to 115 mm in diameter.
  • Used on single or multi-phase systems, with phased or unphased currents and on balanced or unbalanced circuits
  • The shape allows a safe use even when wearing safety gloves

Characteristics

The B102 clamp is designed for measuring leakage current diverted towards the earth.
It enables the fault to be located or anticipated without disconnecting the equipment linked.
It is specially designed to detect low fault currents on power circuits.

B102 clamp can be used on all the analyzers of the latest generation of NanoVIP® family (production from 2015 onwards with automatic recognition of the current clamps) except for the DS model that can only mount the DC clamp.

For the older NanoVIP® analyzers (without clamps recognition), suitable adapters are available to allow their use.

Icon

Brochure LMA leakage clamp B102 428 54 downloads

Current clamp to detect low leakage currents within electrical networks ...
Measured range 4A rating: 0,5 mA up to 4A
400A rating: 0,5 mA up to 400A
Operating voltage 600V rms
Overload 2000A DC and 100A AC up to 1kHz
Accuracy and Phase shift 4A rating
400A rating
Output/input ratio 1 mV AC / A AC
Overloads Ip limit current: permanent 400 AC RMS
Peak current: < 1000A.
Permissible transient di/dt: ≤30 A/µs.
Conductor temperature: ≤ 70°C with a maximum peak of 90°C.
Frequency From 48 Hz to 1 kHz.
Electrical safety Class II equipment with double or reinforced insulation between the primary and the secondary (winding connected to the connection cable) as per EN 61010-1 & EN 61010-2-032:
– 1000V CAT III, pollution degree 2
– 600V ACT III, pollution degree 2
– Type-B sensor
(1) Conditions of reference 23 °C ± 5 °K, 20% to 75% RH
Continuous external DC magnetic field (earth field) < 40 A/m
Absence of external AC magnetic field
External electrical field < 1 V/m
Position of conductor measured: centred in the measurement coil
Shape of measurement coil: quasi-circular
Measurement instrument input impedance (oscilloscope) ≥ 1 MΩ
Frequency and form of signal measured: 40 to 400 Hz sinusoidal
Dimensions 285 x 175 x 45 mm
Weight 1300g
Operating temperature -10 °C to +55 °C
Storage temperature -40 °C to +80 °C
Operating altitude 0 to 2000 m (for 600V CAT III)
Clamping capacity: 1 cable Ø 115mm
Self-extinguishing capability Casing: UL94 V2 Jaws: UL94 V0
4AADM LMA CLAMP FOR LEAKAGE DETECTION
city-e
Not your language ?