Measurement
NANOVIP® KUBA™
Portable Class-A power quality analyzers
NANOVIP® KUBA™ is a High end Class A Portable Power Quality analyzer for mono, bi, three phases (balanced and unbalanced), medium and low voltages systems
NANOVIP® KUBA™ is a modern, powerful, portable Class A Power Quality Analyzer developed for professionals working on the most complex electrical networks.
It can be used on single-phase, two-phase, three-phase (balanced and unbalanced, 3 or 4 wires) networks, low and medium voltage.
Measurements accuracy according to EN61000-4-30 Class-A requirements.
16bit sampling on two fully independent measuring lines (Main and Aux) guarantees excellent precision and accuracy and capability to performe realtime efficiency of UPS, inverters, transformers.
Sampling and measurements according to EN61000-4-30 Class-A requirements.
The lightest and most compact Class A analyzer
- 5 inches 800×480 touch display
- Can work on networks: single-phase, two-phase, three-phase balanced with or without neutral, three-phase unbalanced with or without neutral
- Full traditional energy analysis (V, I, P, Q, S, F, PF, THD%, instantaneous values / minimum / maximum / average, energy meters absorbed and generated both three-phase for each phase) according to EN50160.
- Conformance EN50160 test and report
- 16bit continuous sampling according to EN61000-4-30
- Unbalance, Harmonics, Interharmonics and flickers according to EN61000-4-7
- Dips, Swell, Interruptions from 10mSec
- Transients from 156 microseconds
- Up to 3 external transducers inputs to measure thermomechanical data; 0..1V, 0..20mA, 4..20mA and PT transducers can be read
- 4 tariff bands setting with the related costs display
- Automatic check of the correct connection of voltage cables and current sensor.
- High capacity rechargeable batteries that guaranties over 10h of work
- Fast USB communication channel
- WiFi and/or 4G connectivity (options)
- Power bank (option) to extend battery autonomy to several days
Fields of use
The NanoVIP CUBEX is a handy tool, compact and light aimed at both those who want to work on their equipment than with industry professionals who need detailed and accurate analysis of power quality; NANOVIP allows in an easy and intuitive way
- To control the loads, consumption and the associated network costs
- Check in service the correct dimensioning of plants
- To prevent the risk for overheating and insulation failures due to high harmonic content
- Check and correct the power factor correction problems
- Identify and eliminate load peaks and exceed power in order also to reduce the bargaining power commitment
- Check and evaluate the returns of UPS, AC / DC measurements
- Measure signals for non-symmetric PWM control of inverter
- Identify the presence of harmonics, outages, overloads or potentially harmful voltage dips for machinery and equipment
- Intercept fluctuations and rapid changes in current and voltage signals
- Measure the inrush currents of motors and electrical machineries
| Standard | IEC61000-4-30 Class A |
| Dimensions | 203x116x53mm |
| Safety | 1000V CAT III |
| Protection degree | IP30 |
| Weight | 850g. |
| Display type | 5 inch touch LCD 800×480 pixels double layer graphic |
| Languages | English- Spanish – Italian – German – French |
| Communication | USB to PC |
| Onboard memory | 2Mb |
| External memory | Micro SD (8GB minimum supplied) |
| Working temperature range | from -10 to +55 °C |
| Umidity | Max 95% |
| External power supply | Wall-plug switching, input 100-240VAC ±10% 47-63Hz, changeable plug; output 7,5VDC – 12W |
| Battery | 4 x AA MiMh 2700mAh |
| Autonomy | >10h |
| Single phase/Double phase networks | yes |
| Three phase 4 wires, balanced networks | yes |
| Three phase 3 wires, balanced networks | yes |
| Three phase 4 wires, unbalanced networks | yes |
| Three phase 3 wires, unbalanced networks | yes |
| Power analisys | V, I, P, Q, S, F, PF, THD(V)%, THD(I)%, cosj, j, peaks, min, max, mid, max. demand, ecc. |
| Counters | kWh, kVArh, kVAh (used and generated) |
| Waves shape | V e I |
| Harmonics | Values and spectrum up to 50° |
| Interharmonics | Yes |
| Flickers | Yes |
| Sags | Dips, swells and net interruption |
| Transitory | Overcurrent and overtension |
| Test EN 50160 | yes |
| Starting currents | yes |
| Measurements in DC | yes |
| K factor | Up to 25° |
| Alarms | Video |
| Alarms logs | 5 on video |
| Hourly tarifs | up to 4 |
| Consumption costs | yes |
| Measurement campaign | Unlimited, up to SD completition |
| Display data refres | 1 sec. |
| Voltage (TRMS) | 4 input channels (3 + common neutral + 1 auxiliary) |
| Current (TRMS) | 5 input channels |
| Power | Active, reactive and apparent. Single phase and total |
| Energy counters | kWh, kvarh, kVAh |
| Harmonics analisys | Up to 50° |
| EN50160 analisys | from 156 uS up |
| Transitional analisys | Overcurrent, overvoltage and starting currents |
| CE conformity | 93/68/CEE (B.T. electrical materials); |
| 89/336/CEE e 2004/108/CE (EMC) | |
| 2006/95/CE – 72/23/CEE (LVD – Low voltages); | |
| 2002/95/CE (RoHS – Dangerous materials restrictions); | |
| 2002/96/CE e 2003/108/CE (WEEE/RAEE – Wasted electrical and electronics materials). | |
| Safety | EN 61010-1 |
| EMC | EN 61326 |
| EN 61326/A1 | |
| EN 61326/A2 | |
| EN 61326/A3 | |
| Temperature | IEC 60068-2-1 (working) |
| IEC 60068-2-2 (storage) | |
| Vibrations | IEC 60068-2-6 |
| Umidity | IEC 60068-2-30 (umidity) |
| Overload | IEC 60947-1 |
| 4NANK | NANOVIP KUBA WITH 3xTRUEFLEX CLAMP 600mm 3kA |
| 4NANKA | NANOVIP KUBA WITH 3xCLAMP CT 200A/1VAC |
| 4NANKB | NANOVIP KUBA WITH CLAMPS 3x200A + 3x3kA |
| 4NANKC | NANOVIP KUBA WITH CLAMPS 3x5A + 3x200A + 3x1000A |
| PART | Quantity | Standard/Option |
| NanoVIP CUBEX | 1 | Standard |
| Battery pack | 1 | Standard |
| Voltage cables | 4 | Standard |
| Crocodiles | 4 | Standard |
| mSD 8Gb min | 1 | Standard |
| External power supply + adapters | 1 | Standard |
| Soft bag | 1 | Standard |
| Carton box | 1 | Standard |
| Calibration certificate | 1 | Standard |
| AC Current probes | 3 or more | Option – According to package |
| DC Current clamp | 1 or more | Option – According to package |
