Measurement
NANOVIP® CUBEX™
Portable analyzers of power quality
NANOVIP® CUBEX™ is a modern, powerful, S-Class portable network analyzer developed for professional analysis of consumption and power quality of the most complex electrical networks.
It can be used on single-phase, two-phase, three-phase (balanced and unbalanced) networks, low and medium voltage.
The advanced features and analysis software supplied makes it a suitable tool to the most demanding professional needs.
Measurement precision,
powerfull analisys
powerfull analisys
- 5 inches 800×480 touch display
- Can work on networks: single-phase, two-phase, three-phase balanced with or without neutral, three-phase unbalanced with or without neutral
- Full traditional energy analysis (V, I, P, Q, S, F, PF, THD%, instantaneous values / minimum / maximum / average, energy meters absorbed and generated both three-phase for each phase) according to EN50160.
- Conformance EN50160 test and report
- 16bit continuous sampling according to EN61000-4-30
- Unbalance, Harmonics, Interharmonics and flickers according to EN61000-4-7
- Dips, Swell, Interruptions from 10mSec
- Transients from 156 microseconds
- Up to 3 external transducers inputs to measure thermomechanical data; 0..1V, 0..20mA, 4..20mA and PT transducers can be read
- 4 tariff bands setting with the related costs display
- Automatic check of the correct connection of voltage cables and current sensor.
- High capacity rechargeable batteries that guaranties over 10h of work
- Fast USB communication channel
- WiFi and/or 4G connectivity (options)
- Power bank (option) to extend battery autonomy to several days
Fields of use
The NanoVIP CUBEX is a handy tool, compact and light aimed at both those who want to work on their equipment than with industry professionals who need detailed and accurate analysis of power quality; NANOVIP allows in an easy and intuitive way
- To control the loads, consumption and the associated network costs
- Check in service the correct dimensioning of plants
- To prevent the risk for overheating and insulation failures due to high harmonic content
- Check and correct the power factor correction problems
- Identify and eliminate load peaks and exceed power in order also to reduce the bargaining power commitment
- Check and evaluate the returns of UPS, AC / DC measurements
- Measure signals for non-symmetric PWM control of inverter
- Identify the presence of harmonics, outages, overloads or potentially harmful voltage dips for machinery and equipment
- Intercept fluctuations and rapid changes in current and voltage signals
- Measure the inrush currents of motors and electrical machineries
| Standard | IEC61000-4-30 Class S |
| Dimensions | 203x116x53mm |
| Safety | 600V CAT III |
| Protection degree | IP30 |
| Weight | 850g. |
| Display type | 5 inch touch LCD 800×480 pixels double layer graphic |
| Languages | English- Spanish – Italian – German – French |
| Communication | USB to PC |
| Onboard memory | 2Mb |
| External memory | Micro SD (8GB minimum supplied) |
| Working temperature range | from -10 to +55 °C |
| Umidity | Max 95% |
| External power supply | Wall-plug switching, input 100-240VAC ±10% 47-63Hz, changeable plug; output 7,5VDC – 12W |
| Battery | 4 x AA MiMh 2700mAh |
| Autonomy | >10h |
| Single phase/Double phase networks | yes |
| Three phase 4 wires, balanced networks | yes |
| Three phase 3 wires, balanced networks | yes |
| Three phase 4 wires, unbalanced networks | yes |
| Three phase 3 wires, unbalanced networks | yes |
| Power analisys | V, I, P, Q, S, F, PF, THD(V)%, THD(I)%, cosj, j, peaks, min, max, mid, max. demand, ecc. |
| Counters | kWh, kVArh, kVAh (used and generated) |
| Waves shape | V e I |
| Harmonics | Values and spectrum up to 50° |
| Interharmonics | Yes |
| Flickers | Yes |
| Sags | Dips, swells and net interruption |
| Transitory | Overcurrent and overtension |
| Test EN 50160 | yes |
| Starting currents | yes |
| Measurements in DC | yes |
| K factor | Up to 25° |
| Alarms | Video |
| Alarms logs | 5 on video |
| Hourly tarifs | up to 4 |
| Consumption costs | yes |
| Measurement campaign | Unlimited, up to SD completition |
| Display data refres | 1 sec. |
| Voltage (TRMS) | 4 input channels (3 + common neutral + 1 auxiliary) |
| Current (TRMS) | 5 input channels |
| Power | Active, reactive and apparent. Single phase and total |
| Energy counters | kWh, kvarh, kVAh |
| Harmonics analisys | Up to 50° |
| EN50160 analisys | from 156 uS up |
| Transitional analisys | Overcurrent, overvoltage and starting currents |
| CE conformity | 93/68/CEE (B.T. electrical materials); |
| 89/336/CEE e 2004/108/CE (EMC) | |
| 2006/95/CE – 72/23/CEE (LVD – Low voltages); | |
| 2002/95/CE (RoHS – Dangerous materials restrictions); | |
| 2002/96/CE e 2003/108/CE (WEEE/RAEE – Wasted electrical and electronics materials). | |
| Safety | EN 61010-1 |
| EMC | EN 61326 |
| EN 61326/A1 | |
| EN 61326/A2 | |
| EN 61326/A3 | |
| Temperature | IEC 60068-2-1 (working) |
| IEC 60068-2-2 (storage) | |
| Vibrations | IEC 60068-2-6 |
| Umidity | IEC 60068-2-30 (umidity) |
| Overload | IEC 60947-1 |
| 4NANX | NANOVIP CUBEX WITH 3xTRUEFLEX CLAMP 600mm 3kA |
| 4NANXA | NANOVIP CUBEX WITH 3xCLAMP CT 200A/1VAC |
| 4NANXB | NANOVIP CUBEX WITH CLAMPS 3x200A + 3x3kA |
| 4NANXC | NANOVIP CUBEX WITH CLAMPS 3x5A + 3x200A + 3x1000A |
| PART | Quantity | Standard/Option |
| NanoVIP CUBEX | 1 | Standard |
| Battery pack | 1 | Standard |
| Voltage cables | 4 | Standard |
| Crocodiles | 4 | Standard |
| mSD 8Gb min | 1 | Standard |
| External power supply + adapters | 1 | Standard |
| Soft bag | 1 | Standard |
| Carton box | 1 | Standard |
| Calibration certificate | 1 | Standard |
| AC Current probes | 3 or more | Option – According to package |
| DC Current clamp | 1 or more | Option – According to package |
