MEASUREMENT

PolarEnergy_MAIN
IN_STOCK_ICON
Available in stock
BUY_ONLINE_ICON
Buy Online

POLAR ENERGY

Precise, reliable and flexible

Panel mounted Energy analyzer

Polar Energy (the successor of the Elcontrol VIP 396 energy analyzer) is a multifunctional panel (96 x 96 mm) mounted tool, ideal for remote measurement, display and remote monitoring of electrical quantities.
It features a 128×128 graphic display of great visibility and comfortable frontal buttons for direct consultation and setup. It has a wide range of electrical measurements.

Compared to the predecessor VIP396, it adds many functionalities that make Polar Energy a modern and user-friendly tool for the user such as the introduction of cyclic connection verification to make installation easy and secure.

The connections to the power cables and to the cables of the voltages and currents are carried out via the 2.5 mm2 terminals in the back of the instrument.

For the calibration of the currents, it is necessary to use three TAs with a secondary 5 A.

It can be used on single-phase, two-phase, three-phase low and medium voltage networks. Advanced features and included analysis software make it an ideal tool for the most demanding professional needs.

Powerfull and flexible

Reduced dimensions in depth in the panel
IP65 front panel
Switching power supply 90/230 and 90/300 Vac Vdc (+ 24-48 Vdc option)
Scalable thanks to the plug & play options to insert posteriorly
3 measuring channels of voltage up to 600V CAT III with the precision of 0.5%
4 distinct current inputs, with 0.5% accuracy
6 different electrical systems analyzed (single-phase, two-phase, three-phase 3-wire unbalanced, three-phase 4-wire unbalanced, balanced three-phase 3-wire, three-phase 4-wire balanced)
Multilingual
Customizable display, choosing which values display in rotation in the lower part and rotating it 90 ° in relation to the comfort of reading

Field of use

Polar Energy has a powerful engine of analysis and calculation that allows a wide range of sizes and capabilities:

Standard measures also according to IEC 61000-4-30 of V, I, P, Q, A, F, PF, THD%, instantaneous values / min / max / avg, absorbed and products, energy meters (kWh, KVA , kVAr) absorbed and generated;
Graphical display of TREND (trends over time) of 6 selectable sizes
Automatic connection test to determine if the connections of the voltages and currents are correct
Customization of the user display, which can independently choose which values to keep under control
Possible to set alarms
485 connectivity
Digital input

Internal dimensions 96x96x58 mm or 96x96x96 mm (with option)
Overall dimensions 96x105x40 mm or 96x105x77 mm (with option)
Safety 600V CAT III
IP protection IP65 front side, IP30 inside panel
Weight 320g + 35g each option
Type LCD dot matrix with white backlight
Languages English – Spanish – Italian – German – Franch
Electrical connections Screw terminals
Communication 485 (option)
Temperature range from -10 to +55 °C
Umidity Max 95%
AC Power supply 90-230V ±10% 50-60Hz 8VA
DC power supply 90-300V ±10% 8W, 12-24V ±10% (option), 48-60V ±10% (option)
Consumption 5VA
Wires section 2,5mm
Single Phase / Two Phase Systems
Three – phase, 4 – wire, balanced and non
3 – wire, balanced and non
VOLTAGE (TRMS)
Channels 3 channels + neutral channels in common
Direct Phase-Phase Measurements Phase-Phase 17-700VAC 40-70Hz, Phase-Neutral 10-400VAC 40-70Hz
Measurements across VT Ratio 1-60000, maximum displayed value 20MV
Permanent load 800VAC
Sensitivity 10V Phase-Neutral, 17 Phase-Phase
Wires section 2,5mm2
CURRENT (TRMS)
Channels 4 independent channels with resistor
Consumption < 1VA
Scales 2
Direct measures not available
Maximum measurable current 8A
Measures across TA Ratio 1:60000, maximum displayed value 500kA
Permanent overload 10A
Temporary overload 50A 1 sec
Sensitivity 10mA
Wires section 2,5 mm2
POWERS
Per each phase < 999 GW,Gvar,GVA
Global < 999 GW,Gvar,GVA
CURRENT (TRMS) 5 independent inputs
POWERS Active, reactive e apparent. Single phase and total
ENERGY COUNTERS
Measures kWh, kvarh, kVAh
ACCURACY
Voltages ±0.25% + 0.05%FS
Currents ±0.25% + 0.05%FS
Powers ±0.5% + 0.05%FS
Power factor ±0.5°
Frequency ±0.01 Hz (40-70Hz)
Active energy Class 0.5
Reactive energy Class 1
EN50160 (only TOP)
Interruptions >500mS
Voltage drops >500mS
Overloads >500mS
CE conformity 93/68/CEE (B. T.);
89/336/CEE e 2004/108/CE (EMC)
2006/95/CE – 72/23/CEE (LVD);
2002/95/CE (RoHS);
2002/96/CE e 2003/108/CE (WEEE/RAEE)
Safety EN 61010-1
Electromagnetic compatibility (EMC) EN 61326
EN 61326/A1
EN 61326/A2
EN 61326/A3
Temperature IEC 60068-2-1 (working)
IEC 60068-2-2 (storage)
Vibrations IEC 60068-2-6
Umidity IEC 60068-2-30
Overload IEC 60947-1
4BAAA POLAR ENERGY
4ABAE CONVERTER USB/RS485
4A485 OPTION RS485
4AALM OPTION 2 ALARMS
4ADIN OPTION 2 DIGIT
4AVDC OPTION 12-24
41VDC OPTION 48-60 VDC
city-e
Not your language ?