NanoVIP® BOX™ – NanoVIP® Power Quality always and everywhere under control with 4G Gsm connectivity

NanoVIP® BOX™ extend NanoVIP family analyzers with:

4G connectivity, offering to users a wide range of connectivity options to monitor and use it.
Self powering function from measuring line

NanoVIP® BOX™ includes following main connectivity options:

Mode PUSH: NanoVI P® BOX™ connects to the available Gsm network and sends data directly to the cloud server of Elcontrol cloud.elcontrol-energy.net; this mode is particularly useful if you want to remotely monitor the progress of a measurement started many miles away and do not have access from the outside to the local network.
Mode REMOTE: NanoVI P® BOX™ connects to the Gsm network and wait for and incoming connection to be fully remotely controlled by the user: this function is particularly powerfull when your instrument must be left onsite for a long time and user needs to check everything is going properly or needs to change any setup parameter, stop and restart campaign etc. All NanoVI P® BOX™ functions remain fully available from remote without any restriction.

Survey dowmload: user can download survey directly from site to check results before moving on site.
Inbound SMS commands: NanoVI P® BOX™ can react to a wide range commands via SMS; this features brings remote control capability to a unique level on the today market.

Outbound SMS: NanoVIP® BOX™ can send SMS directly to user to update hime about:
- Device status: battery level, survey progress, Cloud connectivity, SD status etc.
- Alarms: any alarm set by the user can be also sent to user via SMS
- Patrol: in case of any event happens to device (battery decrease, keyboard ouched, SD extracted, survey stopped etc.), NanoVIP informs user via SMS.